HKS CAMP2 provides real-time engine monitoring on the vehicle's on-board factory or aftermarket monitor. The multi-meter is developed to monitor the speed, engine RPM, air/fuel value, knocking value and to provide the driver with a fuel consumption and cost data. CAMP2 is designed to work with most vehicles equipped with OBD2 ports and F-CON S/SZ/iS/V-Pro engine management system.

Features

Displayable Data

• Speed
• Engine RPM
• Water temperature
• Ignition timing
• A/F correction value
• A/F learning value
• Intake air volume
• Intake temperature
• Throttle position
• Intake manifold pressure
• O2 voltage
• Airflow voltage
• Fuel injection time
• Battery voltage
• Fuel efficiency
• Horsepower
• A/F value
• Knocking value
• I/F boost pressure
• I/F water temperature
• I/F oil temperature
• I/F oil pressure
• I/F fuel pressure
• I/F exhaust temperature (EGT)

Past Function

• Up to 6 following calculations can be displayed on the screen at once:
  • Elapsed time
  • Driving distance
  • Average speed
  • Fuel consumption
  • Average fuel consumption
  • Fuel cost

Past Mode

• Real time fuel efficiency can be monitored relative to time, distance and speed.
• Real-time fuel efficiency is shown as a bar graph on the bottom right of the screen.

Graph

• Up to 6 data parameters can be viewed on a time based axis by graph and digital meter

Graph Mode

• View function: data changes at 0.2 second intervals can be monitored.
• Logging can be conducted for up to 10 minutes.

Analog Meter Indicator

• Selected items can be shown in the analog meter

Analog Mode

• Select from two modes: either 3 analog meter displays, or 1 analog meter with 6 digital indicators below it.
• Analog meters accurately show continuously changing data.

Digital Meter Indicator

• Selected items can be shown in the digital meter

Digital Mode

• Select from 6 digital meters or 3 digital bar graphs to appear on the screen.
• Digital meter shows accurate data for each item.

F-CON (Option)

• For vehicles equipped with HKS F Con S/SZ/iS/V-Pro Engine Management Systems

F-CON Mode

• The input value and/or the output value of each F-CON sensor can be monitored.
• F-CON S / SZ / SA / iS setting data can be monitored and edited when connected to CAMP2. The unique settings can be made on the engine specification, such as exhaust type or intake type.

I/F Unit Connection

• Connecting an HKS I/F Unit to the CAMP2 will allow connected sensor data to be displayed on the screen

Warning Function

• When actual data exceeds or falls short of set value, the driver is notified with audible and visual alerts.

Peak Hold Function

• The data peak values display

Specifications

• CAMP2 main unit
  • Operating voltage: DC 10-16 V
  • Maximum electrical power consumption: 2 W
• Remote control
  • Battery type: CR2025
• Tube fuse for 12 V auxiliary adapter harness and power supply harness
  • 1 A fuse

Supported car makers

• Toyota
• Nissan
• Mazda
• Honda
• Mitsubishi
• Subaru
• Suzuki
• Daihatsu
• Lexus
• BMW
• Mini
• Audi
• Volkswagen
• Lotus

Package contains

• CAMP2 main unit
• Remote control receiver (2m)
• Remote control + battery
• OBD2 harness
• Relay harness
• 12V auxiliary adapter harness
• Power supply harness
• AV cable
• Double-sided tape
• Velcro tape
• Tie wrap
• Splice
• Instruction manual
• Application list