Germes Lab.

Camera Connection Cable for Nissan Leaf

Price: USD 40
Your price: USD 30
Add to Cart
Product code:
Ship from:
EU stock, HK Warehouse 
0.05 kg
Estimate shipping cost

Short Review. Cable for rear view camera connection for Nissan Leaf with EV GEN1 and EV GEN2 multimedia systems without damaging car wiring.


Cable for rear view camera connection in Nissan Leaf cars with OEM Nissan EV GEN1 and Nissan EV GEN2 multimedia system. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. Dynamic parking lines that will turn with the steering wheel will be displayed on the camera image. Parking lines can be adjusted in the service menu (see parking lines adjustment manual). The device is connected to the 40 pin socket (as shown in the connection diagram). Depending on your car radio model, this socket may be located in a different place from the one shows in the diagram. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.

Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there’s a grey REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu.

Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.

The most frequently asked questions about camera and video connection cables.

Camera Connection Cable for Nissan

Camera Connection Cable for Nissan

Model Model years Head unit Additional compatibility condition
From To
Leaf 2010 2017 Clarion with motorized display Cars manufactured for all EU, USA, JP markets
Head units with and without navigation
e-NV200 2014

Note! Only cameras in NTSC format are supported.

Nissan Leaf GEN 1 Nissan Leaf GEN 2

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.

Camera Connection Cable for Nissan

Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.

All rights reserved. This material from web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.

comments powered by Disqus