Camera Connection Cable for Nissan with Nissan Audio System

id: 871913
0.05 kg
Availability in stock: HK EU
Cable for rear view camera connection for Nissan with Nissan Audio multimedia system, not equipped with navigation, without damaging car wiring.
USD 20.00
Add to cart
USD 20.00
Add to cart
Add to wishlist
Impossible to estimate the shipping cost

Cable for rear view camera connection in Nissan cars with OEM Nissan Audio multimedia system without navigation. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. Dynamic parking lines that will turn with the steering wheel will be displayed on the camera image. Parking lines can be adjusted in the service menu (see parking lines adjustment manual). The device is connected to the 32 pin socket (as shown in the connection diagram). Depending on your car radio model, this socket may be located in a different place from the one shown in the diagram. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.

Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there’s a gray REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu.

Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.

The most frequently asked questions about camera and video connection cables.


Model Model years Head unit Screen size Market
From To
Almera 2011 2017 Nissan Audio without navigation 4.2"
Cars for all EU/US/CA/BR/Asia markets
Altima Hybrid
Cube 2018
Juke 2019
Lannia 2016
Micra 2011 2017
Murano 2015 2018
Navara 2019
Note 2011 2018
Note Versa
NP300 Navara 2015 2019
NV Cargo 2012
NV200 Taxi 2014
NV Passenger 2012
Pulsar 2014 2018
Rogue 2011 2019
Rogue Select 2012
Sentra 2015
Teana 2014
Tiida 2016
Titan 2014
Versa Note
Versa Sedan 2015
Qashqai 2014
X-Trail 2015

Note! Only NTSC cameras are supported.

Nissan Audio European Nissan Audio Asia Nissan Audio US 5 inch display Nissan Audio US 7 inch display

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.


Product specifications, appearance and package content may differ from those presented on the website and can be changed without notice. Please, contact sales manager before purchase.
All rights reserved. This material from web site may not be published, rewritten or redistributed in whole or part without authorship indicated and backlinks provided.
Cable for OEM Head Unit is compatible with the following models of Cars
  • Nissan
Cable for OEM Head Unit is compatible with the following models of Camera Connection
  • Nissan

Customers Feedback

You have no
Sales chat
 English online
 Español online
 Русский online
 Technical support online
Sales chat