Navigation System for Subaru based on CS9200RV
Overview
Description
Navigation system for Subaru based on CS9200RV is aimed at expanding navigation functionality of Subaru OEM multifunctional displays. Navigation box may be installed in Subaru Impreza 2008∼, Outback, Legacy and Tribeca cars with OEM monitor (including the ones with touch screen displays) and external navigation unit with DVD slot for navigation software.
The device is installed instead of OEM navigation. As a result, you receive fully functional navigation with the required interface language and maps, and touch screen control.
CS9200RV navigation box supports software from Navitel, IGo8 and other programs operating under WIN CE 6.0. In case a new version of the navigation program is released, it can be easily updated by rewriting it on SD card.
Compare CS9100/CS9200/CS9900/KD-900/Andromeda navigation boxes.
Subaru Navigation System
Additional Features
Navigation Box Functionality Expansion
- Internet connection
We recommend purchasing 3G USB modem for Internet connection. It is specially prepared for operation with navigation box. - USB devices connection. You can connect 2 USB devices with more than 500 mA current consumption without USB booster.
- Additional devices connection:
- Radar detector
- USB gyroscope
- TMC antenna to receive traffic information
- USB dongle for Wi-Fi (e.g., via phone connection)
- 3G modem
- Bluetooth module
OEM Antenna Connection
Specially developed adapter allows you to connect navigation box to OEM GPS antenna which provides high quality signal and easier installation.
Subaru Navigation System
Technical Specifications
System | Processor | ARM11 Samsung S3C6410 800 MHz |
OS | WIN CE 6.0 | |
Language / localisation | English / English (Russian) | |
Memory | ROM | 128 MB |
RAM | DDR 128 MB | |
Memory cards | MMC, miniSD, SD, SDHC up to 32 GB (depends on the manufacturer) |
|
Video inputs | 2 video inputs | |
Video outputs | RGB supported resolutions: |
320×240, 400×234, 480×234, 480×272, 640×240, 640×480, 800×480 |
RCA | NTSC 3,58 MHz | |
Audio outputs | RCA | stereo |
TS 3.5 mm | 0.25 W dynamics socket | |
Data | USB (2) | A type (for external devices 5 V / 1 A) |
Control | Radio remote controller | with touch panel |
Car OEM control buttons | OEM touch screen | |
GPS | Chipset | MTK MT3329T |
Channels | 66 | |
Frequency | L1 1575,42 MHz | |
Sensitivity | -165 dB | |
Reacquisition | 1 s | |
Protocol | GPGGA (1 time/1 s), GPGSA (1 time/5 s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1 s), (additionally GLL or MTK NMEA Command) |
|
Hot/warm/cold start | 1 s / 28 s /30 s | |
Antenna | SMA, active | |
Power | 10-30 V DC | Can be connected to constant power supply. Sleep mode when ignition is switched off can be activated. |
Dimensions | Main board dimensions (with holders) | 160 mm × 110 mm × 260 mm |
Weight | 430 g |
Subaru Navigation System
Supported Models*
- Subaru Impreza 2008
- Subaru Outback
- Subaru Legacy
- Subaru Tribeca
* with built-in color touch screen monitor and external DVD navigation unit.
Subaru Navigation System
Manuals
Navigation Software Installation Tips *
- Default way for navigation software installation on memory card: Navi\Navi.exe
- Navigation software settings:
- GPS receiver COM port: COM1
- GPS receiver rate: 9600
- Video output resolution: 480×234
Subaru Navigation System
Package Content
- CS9200RV navigation box main board
- Interface adapter for Subaru
- Remote controller
- GPS antenna
- External speaker
- Power cable 2.5 m
- SD memory card 4 GB
Note! Navigation programs are not included in the package.
Note! Navigation box and navigation software installation shall be performed by well-trained specialist. Otherwise, we are not liable for equipment damage or incorrect operation.
Specifications
Navigation Box is compatible with Spare parts | |
Navigation Box is compatible with |
|
Processor frequency |
|
Operation System |
|
RAM size |
|
GPS Receiver |
|
ROM size |
|
USB Ports |
|
Wi-Fi Connection |
|
Bluetooth Connection |
|
AV inputs |
|