Mazda 2, Mazda 3, Mazda 6, CX-5, CX-9, CX-3 Reverse Camera Kit With 4 Pin Cable Wire Harness
Overview
Description
This kit includes a 170° wide-angle reverse camera, connection cables (6 m / 20 ft), and a 4-pin wire harness that ensures seamless integration into your car`s system. Fits Mazda 2, Mazda 3, Mazda 6, CX-5, CX-9, CX-3 cars 2006 2007 2008 2009 2010 2011 2012 2013 2014 MY.
Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 4-pin socket (as shown in the connection diagram). Depending on your car radio model, this socket may be located in a different place from the one shown in the diagram. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
In some cases, rear view activation signal may be absent in the wiring, connected to the head unit. For cases like this there’s a gray REV wire in our cable. In should be installed, as shown in the manual. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu.
The reverse camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.
Compatible Models
Contact us before ordering to ensure our solution is compatible with your car`s system.
| Model | Model years | Head unit | Screen size | Market | |
|---|---|---|---|---|---|
| From | To | ||||
| 5 | 2008 | 2012 | Head unit with DVD navigation | 7" | US/CA/BR/JP |
| 6 Sedan | |||||
| 6 Wagon | |||||
| 6 Hatchback | |||||
| CX-7 | 2006 | ||||
| CX-9 | 2007 | ||||
| Model | Model years | Head unit | Screen size | Market | |
|---|---|---|---|---|---|
| From | To | ||||
| 2 | 2012 | 2014 | NB1 with or without navigation | 6.5" | US/CA/BR/JP |
| 3 | AU/EU/US/CA/BR/JP | ||||
| 6 | |||||
| CX-5 | |||||
| CX-9 | |||||
Incompatible Models
| Model | Model years | Head unit | Market | |
|---|---|---|---|---|
| From | To | |||
| CX-9 | 2012 | 2014 | Head unit with 4.5" color monitor |
Cars for all markets |
| All Mazda models | 2011 | 2DIN SANYO TomTom (NVA-SD8110 model) |
||
Compatible Head Units
Incompatible HU
The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.
Installation Guide
Package Content
- Reverse Camera (720P) with 4PIN connector - 1 pc.
- Wire Harness (4-pin) - 1 pc.
- Connection Cables (6 m / 20 ft)
Specifications
| Camera Connection Kit is compatible with Head Units |
|
