Reverse Camera Cable 24 pin for Nissan Juke, Micra, Note, Murano, Titan

This modified 24036BG00A cable is used for connecting rear view cameras in Nissan cars with Connect OEM multimedia system of 1 / 2 / 3 generations. Using this cable you will be able to install the aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24 pin socket (as shown in the connection diagram). After connection all OEM functions which work using this socket are preserved due to transit type of connection.

Note!The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line.

The most frequently asked questions about camera and video connection cables.

Camera Connection Cable for Nissan
Compatibility

Nissan Connect 1 Generation

Model	Model years		Compatibility conditions	Photo
	From	To
Almera	2011	2014	Cars with OEM 5'' monitor
Cube	2011	2016
Juke	2011	2014
Micra	2011	2014
Navara	2011	2014
Note	2011	2014
NV Cargo	2012	2014
NV Passenger	2012	2014
Rogue	2011	2014
Tiida	2011	2014
Qashqai	2011	2014
X-Trail	2011	2014

Nissan Connect 2/3 Generations

Note! Only NTSC format cameras are supported.

Nissan Connect 2	Nissan Connect 2 US
Nissan Connect 3	Nissan Connect 3 US

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.

Camera Connection Cable for Nissan
Manuals

• Connection diagram for cable for Nissan with Connect Monitors of 1 / 2 / 3 Generation