Rear Camera cable 8 pin for Toyota Aygo, Citroen C1 and Peugeot 108

Cable for rear view camera connection to the OEM monitor of Toyota, Citroen and Peugeot (X-Touch / X-Nav). Using this cable you will be able to install the aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 8 pin socket (marked with an errow in the picture). After connection all OEM functions which work using this socket are preserved due to transit type of connection.

Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely the operating voltage, you can use power converter to decrease heating of the linear power supply which is built in the camera. In case the camera requires more than +6 V, connect the camera power directly to ACC line.

The most frequently asked questions about camera and video connection cables.

Camera Connection Cable
Compatibility

Note! Only cameras in NTSC format are supported.

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.

Camera Connection Cable
Manuals

• Connection diagram for the cable for Toyota Aygo / Peugeot 108 / Citroen C1