DVB-T2 TV Receiver and Connection Cable Kit for Toyota Touch 2 / Entune Monitors
Overview
Description
The kit includes everything you need to connect digital T2 television to a car monitor. It consists of a DVB-T2 TV receiver and a connection cable for Toyota Touch 2 / Entune monitors.
Make sure you don't watch TV while you are behind the wheel!TV Receiver and Connection Cable
Features
- 4 external antennas guarantee high-quality signal
- A set of additional functions, including EPG (TV guide) and PVR (TV program recording)
- No OEM functions are disturbed after connection
- Connection of external USB drives
TV Receiver
Car DVB-T2 receiver will turn your flip-down, in-dash or OEM monitor into car TV set. The TV receiver has embedded media player which allows you to watch video of virtually any format from the USB carrier and use the receiver as an HD player. Our engineers have tested its operation at the speed of 70 km/h (43.5 m/h).
Equipped with multilanguage OSD menu (languages: English, Russian, Thai, etc.) and an IR eye for remote control unit.
Note! Using TV receiver when the car is in motion, is allowed only for the passengers and not for the driver!
Note! Before purchasing this car DVB-T2 receiver please check DVB-T2 coverage in your region.
Video Connection Cable
This cable allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is enabled. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Note! In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
TV Receiver and Connection Cable
Compatibility
Touch 2
Model | Model years | System | Additional compatibility conditions | |
---|---|---|---|---|
From | To | |||
Alphard | 2015 | – | Toyota Touch 2 Toyota Touch 2 with Go Toyota Touch 2 with Go Plus |
28 pin socket on the monitor for cable connection |
Auris | 2014 | |||
Avensis | 2014 | |||
C-HR | 2016 | |||
Camry | 2014 | |||
Corolla | 2013 | |||
Corolla Sedan | 2013 | |||
GT86 | 2016 | |||
Highlander | 2013 | |||
Hilux | 2013 | |||
Land Cruiser 150 | 2013 | |||
Prius+ | 2014 | |||
Mirai | 2016 | |||
RAV4 | 2014 | |||
Verso | 2014 | |||
Verso S | 2013 | |||
Yaris | 2014 |
Entune
Model | Model years | System | Additional compatibility conditions | |
---|---|---|---|---|
From | To | |||
4Runner | 2014 | – | Entune Audio Entune Audio Plus Entune Premium Audio |
28 pin socket on the monitor for cable connection |
Alphard | 2015 | |||
Avalon | 2014 | |||
C-HR | 2016 | |||
Camry | 2014 | |||
Corolla | 2013 | |||
Fortuner | 2015 | |||
GT86 | 2016 | |||
Highlander | 2013 | |||
Mirai | 2016 | |||
Prius c | 2014 | |||
Prius v | 2014 | |||
RAV4 | 2014 | |||
Sequoia | 2014 | |||
Sienna | 2014 | |||
Tacoma | 2014 | |||
Tundra | 2014 | |||
Venza | 2014 |
TV Receiver and Connection Cable
Receiver Technical Specifications
Input signal frequency | UHF: 474 MHz - 858 MHz |
VHF: 177.5 MHz - 226.5 MHz | |
Decoding standards | MPEG4,MP@ML,MP@HL,H.264/AVC |
MPEG-1, and-2,layer and 2, MPEG-4, HE-AAC | |
Inputs | USB |
Video input | |
Input for antenna (4) | |
Outputs | Video |
HDMI | |
Audio (R & L) | |
Power | +12 V ~ 24 V, 6 W |
Dimensions | 140 mm × 87 mm × 26 mm (without connectors) |
TV Receiver and Connection Cable
Manuals
To display image from the video devices, connected via TV receiver video input, you need to:
- Apply ACC power to TV receiver
- Turn on the TV receiver via the remote control
TV Receiver and Connection Cable
Package Content
Specifications
Multimedia Kit is compatible with the following models of Cars |
|
Multimedia Kit is compatible with Head Units |
|