Reverse Camera Cable 20 pin + 5 pin GEN5 / GEN6 for Toyota Camry, Corolla, RAV4, Verso, Hilux, Prius, Land Cruiser, Auris, Avensis

This cable allows you to connect rear view cameras in Toyota cars with MFD GEN5 and GEN6 multifunctional displays. The cable offers Plug&Play installation of aftermarket cameras without damaging the OEM wiring.

Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 20 pin socket (see: conection diagram for GEN5, connection diagram for GEN6). After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection. There is a special cable included in the package content, specifically designed for cars that do not have the rear view activation signal in the monitor and were not equipped with rear view camera connection functionality by the manufacturer.

Note! Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.

The most frequently asked questions about camera and video connection cables.

Camera Connection Cable
Compatibility

Note! Only NTSC format cameras are supported.

The photo is provided for reference only. Appearance of the control panel and monitor may slightly differ depending on the car model.

Camera Connection Cable
Manuals

• Download connection diagram for rear view camera connection in GEN5
• Download connection diagram for rear view camera connection in GEN6

Camera Connection Cable
Package Contents

• Camera connection cable
• Additional cable