Smartphone/iPhone Wi-Fi Mirroring Adapter and Connection Cable Kit for Toyota Touch 2 / Entune Monitors
Overview
Description
The kit includes a smartphone/iPhone mirroring adapter and a video connection cable for Toyota Touch 2 / Entune monitors.
Adapter
Adapter for connecting iOS and Android devices to the car multimedia system. Allows playing video and audio on connected monitor. Supports screen mirroring to display navigation, menu, applications, etc. on the connected monitor.
The adapter is connected to the monitor via RCA cable. iPhone/iPod/iPad or Android phone/tablet PC are connected to the adapter via Wi-Fi and thus stream video and audio to the connected monitor. Screen mirroring function is also supported.
Note! The sound may be missing because the adapter uses a specific audio signal without the GND signal and some equipment can't recognize this type of signal. The simplest solution is to put a jumper between the terminals, as shown on the photo.
Note! The adapter now supports devices with iOS11 operating system. Update instructions can be found here.
Video connection cable
This cable allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using a video interface. After the cable connection "AV input" icon is automatically activated in the monitor, and video in motion is enabled. As a result, you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC, and also linear stereo signal.
Note! In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
Video Review
The rest of the videos are available in the Video section.
Compatibility
Touch 2
Model | Model years | System | Additional compatibility conditions | |
---|---|---|---|---|
From | To | |||
Auris | 2014 | – | Toyota Touch 2 Toyota Touch 2 with Go Toyota Touch 2 with Go Plus |
28 pin socket on the monitor for cable connection |
Avensis | 2014 | – | ||
Camry | 2014 | 2017 | ||
Corolla | 2013 | 2018 | ||
Corolla Sedan | 2013 | 2018 | ||
Highlander | 2013 | – | ||
Hilux | 2013 | – | ||
Land Cruiser 150 | 2013 | – | ||
Prius+ | 2014 | – | ||
RAV4 | 2014 | 2018 | ||
Verso | 2014 | – | ||
Verso S | 2013 | – | ||
Yaris | 2014 | – |
Entune
Model | Model years | System | Additional compatibility conditions | |
---|---|---|---|---|
From | To | |||
4Runner | 2014 | – | Entune Audio Entune Audio Plus Entune Premium Audio |
28 pin socket on the monitor for cable connection |
Avalon | 2014 | – | ||
Camry | 2014 | 2017 | ||
Corolla | 2013 | 2018 | ||
Fortuner | 2015 | – | ||
Highlander | 2013 | – | ||
Prius c | 2014 | – | ||
Prius v | 2014 | – | ||
RAV4 | 2014 | 2018 | ||
Sequoia | 2014 | – | ||
Sienna | 2014 | – | ||
Tacoma | 2014 | – | ||
Tundra | 2014 | – | ||
Venza | 2014 | – |
Adapter Technical Specifications
Signal standards | Miracast, Airplay, DLNA |
Wi-Fi | 802.1 b/g/n |
Frequency | 2.4 GHz |
Working temperature | -20°C~75°C |
Outputs: | AV |
HDMI | |
Weight | 133 |
Dimensions | 86 mm × 58 mm × 18 mm |
Input voltage | 12 V |
Consumed power | 2.5 W |
Manuals
To adjust the video system of the input video signal or switch the picture mode (4:3, 16:9), refer to the user manual of your monitor.
Note! After this cable connection the OEM microphone of OEM BT-HandsFree will work the same way as before (if it has been installed). if there is no OEM microphone in your car, you will need the AV cable with microphone. Please, contact the manager to purchase that cable (or leave the comments in the order).
Package Content
Specifications
Smartphone Connection Kit is compatible with the following models of Cars |
|
Smartphone Connection Kit is compatible with Head Units |
|
Smartphone Connection Kit is compatible with Smartphone Screen Mirroring |
|
Smartphone Connection Kit is compatible with Bluetooth/USB adapters for iPhone/Smartphone |
|