Cable for Touch Screen Panel Connection (4 Pin)

The cable is designed for direct connection of 4-wire resistive touch screen panels to CS9200 / CS9900 navigation boxes.

To activate direct connection of the touch screen panel to CS9200 / CS9900 navigation boxes select 4PIN Touch control type (protocol). After protocol selection restart the device and calibrate it.

Cable for Touch Screen Panel
Connection

Note! You can connect only touch screen panels with flex cable connection type. Pin pitch on the flex cable should be 1 mm.

During cable connection be sure that it is not subjected to extreme heat or cold. Also make sure there are no electromagnetic noises near it. If you don't keep to these rules it can have negative impact on the touch screen panel operation.

Cable for Touch Screen Panel
Compatible Navigation Boxes

• CS9200RV
• CS9200
• CS9900
• WP9200
• WP9900
• Element F10
• Element F15
• Phantom SPT-200

Cable for Touch Screen Panel
Package Content

• Cable with 4 Pin connector (2 m)