CS9100 Car Navigation Box (for OEM Car Monitors)
Overview

Description
CS9100 navigation box kit is meant for installation in cars equipped with OEM colour monitor (including touch screen monitors) and navigation. The device is connected to OEM monitor via car video interface instead of the OEM navigation. As a result, you receive fully functional navigation with the required interface language and maps, and touch screen control (for touch screen monitors). For monitors without touch screens you will need a remote control with touchpad or touch screen panel installation.
CS9100 navigation box supports software from Navitel, IGo2006, IGo8, Garmin and other programs operating under WIN CE 5.0. In case a new version of the navigation program is released, it can be easily updated by rewriting it on SD card.
Note! If you need to connect navigation box to car multimedia receiver, buy CS9100 navigation box for multimedia receivers and necessary connection cables.
You can also connect CS9100 navigation box to Internet. For this purpose purchase Huawei 3G USB GPS Modem for it.
Compare CS9100/CS9200/CS9900/KD-900/Andromeda navigation boxes.
CS9100 Navigation Box Kit
Technical Specifications
- CPU: Samsung 2440 ARM9 400 MHz
- OS\Language\Localization: WIN CE 5.0\Eng.\Rus.(Eng.)
- Memory: Nand 64 MB, SDRAM 64 MB
- Memory card: MMC, mini SD, SD, SDHD up to 16 GB (SDHC depends on the manufacturer)
- Video Out:
- RGB 480 x 234 (according to the firmware)
- RGB 400 x 234 (according to the firmware)
- Video Out: 1 x RCA NTSC 3.58 MHz
- Audio Out:
- 1 x RCA stereo 0.25 W
- 1 x mono jack 3.5 mm (for the speaker)
- USB Host: 1 x Type A (for external devices)
- USB Device: 1 x Mini USB (deactivated)
- Control:
- 1 x Remote control with a touch pad
- Touch screen (via USB controller) *
- Onboard control devices (adapters for Toyota, Lexus, Mazda, Subaru) *
- GPS:
- MTK MT3329T
- Channels: 66
- Frequency: L1 1575.42 MHz
- Sensitivity -165 dB
- Reacquisition: 1 s
- Protocol: NMEA0183 V3.01: GPGGA (1 time/1 s), GPGSA (1 time/5 s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1s), (additionally GLL or MTK NMEA Command)
- Hot\Warm\Cold start: < 1\28\30 s
- Antenna: SMA active (cable length 5m)
- Power supply: 10~30 V DC
- Main board dimensions: 160 mm x 110 mm x 26 mm
- Weight: 1.130 kg
* USB controller is not included in the package
*2 Adapters for Toyota, Lexus, Mazda, Subaru are sold only together with navigation box.
CS9100 Navigation Box Kit
Manuals
- Download pinout guide for RGB and DATA cables
- Download guide for modem connection to CS9100 Navigation Box
- Download guide for GPS antenna installation
Navigation Software Installation Tips*
- Default way for navigation software installation on memory card: Navi\Navi.exe
- Navigation software settings:
- GPS receiver COM port: COM1
- GPS receiver rate: 9600
- Video output resolution: 480×234
CS9100 Navigation Box Kit
Package Content*
- CS9100 navigation box
- Remote control
- GPS antenna
- External speaker
- 4 GB SD memory card
- 2.5 m power cable
- Data cable
- RGB cable (9 Pin)
* Navigation programs are not included in the package.
Note! Navigation unit and navigation software installation shall be performed by well-trained specialist. Otherwise, we are not liable for equipment damage or incorrect operation.
Specifications
Navigation Box is compatible with |
|
Processor frequency |
|
Operation System |
|
RAM size |
|
GPS Receiver |
|
ROM size |
|
USB Ports |
|
Wi-Fi Connection |
|
Bluetooth Connection |
|
AV inputs |
|