CS9100RV Navigation Box with 2 Video Inputs

CS9100RV navigation box as distinguished from CS9100 is equipped with two video inputs (video only, no sound can be connected) which can be switched via control units connected to the device. Use one video input to connect multimedia devices such as DVD, TV, DVB-T tuner and another one to connect rear view camera with automatic image display while reversing. CS9100RV navigation box is a good solution for vehicles without built-in backup camera function and for restricted space models where additional interfaces cannot be installed. Navigation box video inputs automatically detect video signal type (PAL\NTSC).

CS9100RV Navigation Box
Specifications

• CPU: Samsung 2440 ARM9 400 MHz
• OS\Language\Localization: WIN CE 5.0\Eng.\Rus.(Eng.)
• Memory: Nand 64 MB, SDRAM 64 MB
• Memory card: MMC, miniSD, SD, SDHD up to 16 GB (SDHC depends on the manufacturer)
• Video Out:
  • RGB 400 × 234 (depends on the firmware version)
  • RGB 480 × 234 (depends on the firmware version)
• Video Out: 1 x RCA NTSC 3.58 MHz
• 2 Video inputs:
  • 1 × TS 3.5 mm socket
  • Green connector for rear view camera connection
  • Yellow connector for additional video sources connection and display on the built-in screen (resolution: 320 × 240)
• Audio out:
  • 1 x RCA stereo 0.25 W
  • 1 x mono jack 3.5 mm (for the speaker)
• USB host: 1 x type A (for external devices)
• USB device: 1 x mini USB (deactivated)
• Control:
  • 1 x Remote control with a touch pad
  • Touch screen (via USB controller or cable for multimedia receiver) *1
  • Onboard control devices (adapters for Toyota, Lexus, Mazda, Subaru) *2
• GPS:
  • MTK MT3329T
  • Channels: 66
  • Frequency: L1 1575.42 MHz
  • Sensitivity -165 dB
  • Reacquisition: 1 s
  • Protocol: NMEA0183 V3.01: GPGGA (1 time/1 s), GPGSA (1 time/5 s), GPGSV (1 time /5 s), GPRMC (1 time /1 s), GPVTG (1 time/1s), (additionally GLL or MTK NMEA Command)
  • Hot\Warm\Cold start: < 1\28\30 s
  • Antenna: SMA active (cable length 5m)
• Power supply: 10~30 V DC
• Main board dimensions: 160 mm × 110 mm × 26 mm
• Weight: 1.130 kg

*1 USB controller and cables for multimedia receivers are not included in the package.
*2 Adapters for Toyota, Lexus, Mazda, Subaru are sold only together with CS9100(RV) navigation boxes.

CS9100RV Navigation Box
Additional Features

Connection to AV receivers

By means of additional cables: C-NET, PA-AVI, PA-RGB1, PA-RGB2, JVC-TC1, PI-RGB1, AP-RGB1, KEN-RGB1, Audiovox, Elead, Fujitsu Ten the user can connect CS9100 navigation box to AV receivers (Clarion, Panasonic, Pioneer, Alpine, Kenwood, Audiovox, Elead or Fujitsu Ten with built-in touch screen) to enjoy touch pad navigation control and watch images.

Internet connection (Optional)

Connect Huawei 3G USB GPS Modem to CS9100 navigation box to access wireless Internet.

CS9100RV Navigation Box
Manuals

• CS9100 navigation box cable pinout guide (ver. 3.0)
• How to connect modem to CS9100 navigation box (ver. 1.1)

Navigation Software Installation Tips

• Default way for navigation software installation on memory card: Navi\Navi.exe
• Navigation software settings:
  • GPS receiver COM port: COM1
  • GPS receiver rate: 9600
  • Video output resolution: 480×234

CS9100 Navigation Box
Package Content *

• CS9100RV car navigation box
• Remote control
• GPS antenna
• External speaker
• 2 GB SD memory card
• Video-in cable
• 2.5 m power cable
• 0.5 m RGB cable

* Navigation programs are not included in the package.

Note! Navigation unit and navigation software installation shall be performed by well-trained specialist. Otherwise, we are not liable for equipment damage or incorrect operation.